Hello
I would like to ask for a solution to make a watermill setup but with turtle(s)
That a turtle scoop up water with a bucket.
Sends that bucket to a watermill via pnumetic tubes (redpower2)
Empty buckets need to be brought back via a pipe to the turtle.
Basically the turtle is to act like a deployer block (redpower2)
Thanks to anyone that can help
0
Watermill Setup Question
Started by behedwin, Mar 04 2013 06:01 AM
3 replies to this topic
#1
Posted 04 March 2013 - 06:01 AM
#2
Posted 04 March 2013 - 08:28 AM
Split into new topic. You did not provide a topic title, so one was provided for you.
#3
Posted 04 March 2013 - 09:02 AM
to get this to work you would need 2 relays , and a retreiver along with the turtle
use item, drop direction of outgoing relay , it will go to the watermill then have the retreiver constantly pulsing to get the bucket back that passes into the relay that puts the empty bucket in the turtle
its 10x easier with rp alone
use item, drop direction of outgoing relay , it will go to the watermill then have the retreiver constantly pulsing to get the bucket back that passes into the relay that puts the empty bucket in the turtle
its 10x easier with rp alone
#4
Posted 05 March 2013 - 04:43 AM
Hm can not test this at the moment but when the turtle is down in the water you should be able to select the slot with the bucket then use turtle.place to get a water bucket. Then move the turtle under the mill and use turtle.dropUp to put it in. And turtle.suckUp to get the empty bucket out again.
Edit: Testet my suggestion and it works.
1. Place a Turtle in the water or in front of watersource
2. Place the watermill above the turtle
3. pu a waterbucket in slot 1
4. put an empty Bucket in slot 2
5. put this script to the turtle and start it
RP needs: 1 Filter, 1 Deployer, alloy Wire, Timer, pipes
CC needs: 1 Turtle
i would say with a turtle its 5 times easier
Greets Loki
Edit: Testet my suggestion and it works.
1. Place a Turtle in the water or in front of watersource
2. Place the watermill above the turtle
3. pu a waterbucket in slot 1
4. put an empty Bucket in slot 2
5. put this script to the turtle and start it
wbs = 1 -- put waterbucket in this slot ws = 2 -- put another empty bucket in this slot while true do turtle.select(ws) turtle.place() turtle.dropUp() sleep(0.5) turtle.suckUp() if turtle.compareTo(wbs) then sleep(15) end end
etopsirhc, on 04 March 2013 - 09:02 AM, said:
its 10x easier with rp alone
RP needs: 1 Filter, 1 Deployer, alloy Wire, Timer, pipes
CC needs: 1 Turtle
i would say with a turtle its 5 times easier
Greets Loki
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users