5 replies to this topic

[dekayz]

Title: need help with the program EnderDig

mining turtle in this program put slot 15 and 16 in my enderchest, but their is my fuel and the torches. so turtle runs out of fuel and stops.

[Lyqyd]

Split into new topic.

Please post the full code you are using and any error messages that you receive when you run it.

[dekayz]

the mining turtle loads his inventory until slot 10, then drop enderchest and put all thinks in the chest.
problem, it puts all items incl. my torches an coal for fuel. so turtle runs out of fuel.

function DumpInventoryToSlot1()
  while turtle.detectUp() do
    turtle.digUp()
  end
  turtle.select(1)
  while turtle.placeUp() == false do
    turtle.digUp()
  end
 
  local iLastInventorySlot = 16
  if(bHasTorches) then
    iLastInventorySlot = 14
  elseif(bHasFuel) then
    iLastInventorySlot = 15
  end

i think this is the code who says that, what i want. it says leave the slot 15 and 16 in inventory.
this code is not from me, i found it on http://turtlescripts...gjdh2g-EnderDig

print "Enderchest in slot 1,Torches in slot 15 (optional), Fuel in slot 16 (optional, allows turtle to eat found fuel as a last resort)."
print "How far is this mine?(x)"
local xSize = tonumber(io.read())
print "How high? (y)"
local ySize = tonumber(io.read())
print "How wide (to the left)? (z) (even numbers are more efficient)"
local zSize = tonumber(io.read())

while turtle.getItemCount(1) < 1 do
  print "Please put an ENDER CHEST in slot 1. Hit any key when done."
  os.pullEvent("char")
end



-- 0 = South, 1 = West, 2 = North, 3 = East
-- These are relative values, not necessarily the minecraft facing dir (which you need wireless for)
-- If the player isn't actually facing south, x and z will be inverted or reversed. That's OK.
local iDirection = 0

local xMovedFromOrigin = 0
local yMovedFromOrigin = 0
local zMovedFromOrigin = 0

local bHasTorches = turtle.getItemCount(15) > 0
local bHasFuel = turtle.getItemCount(16) > 0

function CheckFuel()
  if(bHasFuel == false) then
    return true
  end

  if turtle.getFuelLevel() <= 10 then
    turtle.select(16)
    turtle.refuel(1)
    if turtle.getFuelLevel() <= 10 then
      -- phase 2: low fuel, fueling failed, return home
    end
  end

  if turtle.getFuelLevel() <= 1 then
    print "OOF: Out Of Fuel :(/>"
    print "I'm going to eat your coal"
    shell.run("refuel", "all")
    if turtle.getFuelLevel() <= 1 then
      print "I am STILL out of fuel...turtle starving..."
      print "going...dark..."
      print "...so...cold...sleepy..."
      turtle.sleep(120)
      return false
    end
  end

  return true  
end

function MoveForward()
  CheckFuel()

  if(turtle.forward()) then
    if iDirection == 0 then
      zMovedFromOrigin = zMovedFromOrigin + 1
    elseif iDirection == 1 then
      xMovedFromOrigin = xMovedFromOrigin - 1
    elseif iDirection == 2 then
      zMovedFromOrigin = zMovedFromOrigin - 1
    elseif iDirection == 3 then
      xMovedFromOrigin = xMovedFromOrigin + 1
    end
    return true
  else
    return false
  end
end

function TurnLeft()
  iDirection = iDirection - 1
  if(iDirection < 0) then
    iDirection = 3
  end
  turtle.turnLeft()
end

function TurnRight()
  iDirection = iDirection + 1
  if(iDirection > 3) then
    iDirection = 0
  end
  turtle.turnRight()
end

function MoveUp()
  CheckFuel()
  if(turtle.up()) then
    yMovedFromOrigin = yMovedFromOrigin + 1
    return true
  end
  return false
end

function MoveDown()
  CheckFuel()
  if(turtle.down()) then
    yMovedFromOrigin = yMovedFromOrigin - 1
    return true
  end
  return false
end

function PlaceTorch()
  if(bHasTorches == false) then
    return
  end

  if turtle.getItemCount(15) >= 1 then

  local iSaveDirection = iDirection
  while(iDirection ~= 2) do
    TurnRight()
  end

    turtle.select(15)
    turtle.place()

  while(iDirection ~= iSaveDirection) do
    TurnLeft()
  end

  end
end

function DigUp(iBlocks)
  if(iBlocks < 1) then
    return
  end
  for y = 1, iBlocks - 1 do
    while(MoveUp() == false) do
      turtle.digUp()
      turtle.suckUp() 
    end -- end while
  end -- end up/down
end

function DigDown(iBlocks)
  if(iBlocks < 1) then
    return
  end
  for y = 1, iBlocks - 1 do
    while(MoveDown() == false) do
      turtle.digDown()
      turtle.suckDown() 
    end -- end while
  end -- end up/down
end

function DigForward()
  while(MoveForward() == false) do
    turtle.dig()
    turtle.suck()
  end
end


function GoHome()

  DigDown(yMovedFromOrigin)

  if iDirection == 0 then
    TurnRight()
    TurnRight()
  elseif iDirection == 1 then
    TurnRight()
  elseif iDirection == 3 then
    TurnLeft()
  end

  for i = 1, zMovedFromOrigin do
    DigForward()
  end
  TurnLeft()

  for i = 1, xMovedFromOrigin do
    DigForward()
  end

end

function DumpInventoryToSlot1()
  while turtle.detectUp() do
    turtle.digUp()
  end
  turtle.select(1)
  while turtle.placeUp() == false do
    turtle.digUp()
  end

  local iLastInventorySlot = 16
  if(bHasTorches) then
    iLastInventorySlot = 14
  elseif(bHasFuel) then
    iLastInventorySlot = 15
  end

  for i = 2, iLastInventorySlot do
    turtle.select(i)
    turtle.dropUp()
  end
  turtle.select(1)
  turtle.digUp()
end




function Main()
  print("Mining " .. xSize .. ", " .. ySize .. ", " .. zSize)

  TurnLeft()
  local zMax = math.floor(zSize / 2)

  for x = 1, xSize do

    for z = 1, zMax do
      DigUp(ySize)
      DigForward()
      DigDown(ySize)

      if z < zMax then
        DigForward()
      end
      -- if we filled up almost all of the inventory (1 is ender chest so 2-10), dump inventory to chest
      if turtle.getItemCount(10) >= 1 then
        print("~" .. (x / xSize * 100) .. "% complete, " .. turtle.getFuelLevel()  .. " fuel remaining.")
        DumpInventoryToSlot1()
      end
    end -- end z axis

    -- if the face size wasn't even, we still have a single column to clear
    if(zSize % 2 ~= 0) then
      -- print("adjusting for odd face size")
      DigForward()
      DigUp(ySize)
      DigDown(ySize)
    end

    -- if we need to change the orientation of the cleared area, change right to left here
    if(x % 2 ~= 0) then
      TurnRight()
      DigForward()
      TurnRight()
    else
      TurnLeft()
      DigForward()
      TurnLeft()
    end

    if(x % 8 == 7) then
      PlaceTorch()
    end

  end -- end x axis

  print "Returning home now!"

  GoHome()
  DumpInventoryToSlot1()
end



Main() -- !

[Bomb Bloke]

If you don't have the torches/fuel in those last two slots when the program starts, it'll assume it doesn't have any and drop anything in those slots into the chest. Putting them in once the turtle starts moving won't suffice.

[dekayz]

Bomb Bloke, on 25 June 2013 - 06:13 PM, said:

If you don't have the torches/fuel in those last two slots when the program starts, it'll assume it doesn't have any and drop anything in those slots into the chest. Putting them in once the turtle starts moving won't suffice.

they are in when i start the program.
i've changed it into this. IT RUNS!!!

function DumpInventoryToSlot1()
  while turtle.detectUp() do
    turtle.digUp()
  end
  turtle.select(1)
  while turtle.placeUp() == false do
    turtle.digUp()
  end

  local iLastInventorySlot = 13
  if(bHasTorches) then
    iLastInventorySlot = iLastInventorySlot - 1
  end   
  if(bHasFuel) then
    iLastInventorySlot = iLastInventorySlot - 1
  end

i dont know, but it works...

[dekayz]

i play the new tekkit. how can I use a chunkloader for my turtle?