321 replies to this topic

[McLeopold]

Crimor, on 31 March 2014 - 07:16 PM, said:

I gave it pure common and pure cultivated and set it to create imperial then went away for a few hours to do other stuff, it looks like it's just been breeding cultivated with cultivated the entire time, gave it 4 cultivated and 4 common princesses.

Did you see any noble or diligent hybrids at all?

Also, I just pushed a version that includes logging. It creates a new log for each run, so make sure you delete older files. If this happens again, post the log so I can review it.

Edited by McLeopold, 01 April 2014 - 05:41 AM.

[Crimor]

Nope, it only bred cultivated with cultivated, every single other bee I've tried worked though, just did a robust from base bees and it worked totally fine

[McLeopold]

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

[MrEmielH]

McLeopold, on 01 April 2014 - 04:59 PM, said:

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

thanks, thats an inprovement indeed , would an me drive work? sorry ask so much questions but i would like my bees to bee all in one space ?

[scitor]

Great work!

Hey I've found your other scripts on pastebin and followed right up to here. I forked your openbee repo on github earlier and wanted to contribute.

Yesterday I also tried it with an apiarist chest, the good thing is it doesnt need a proxy but you have to put the apiary and comp on top (switch rows).
Also for that line 402 and 433 needs to use invSize instead of 108.

I tried around with the old script and ported it to op too, but this version is much better.
This is really great work already and I'd be glad to help just tell where to assist you or where to begin.

-scitor

[McLeopold]

MrEmielH, on 01 April 2014 - 05:49 PM, said:

McLeopold, on 01 April 2014 - 04:59 PM, said:

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

thanks, thats an inprovement indeed , would an me drive work? sorry ask so much questions but i would like my bees to bee all in one space ?

Don't know, try it out. I would assume an ME drive is going to have 63 slots regardless of it's capacity. It is really only useful if you have stacks of things, not unique items.

[MrEmielH]

McLeopold, on 01 April 2014 - 07:22 PM, said:

MrEmielH, on 01 April 2014 - 05:49 PM, said:

McLeopold, on 01 April 2014 - 04:59 PM, said:

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

thanks, thats an inprovement indeed , would an me drive work? sorry ask so much questions but i would like my bees to bee all in one space ?

Don't know, try it out. I would assume an ME drive is going to have 63 slots regardless of it's capacity. It is really only useful if you have stacks of things, not unique items.

i know but using a drive with 10 times a 1k storage cell woulb be usefull, anyway, do you you have any idea why my computer constantly combined valiant with meadows when i requested an imperial?

[scitor]

McLeopold, on 01 April 2014 - 07:22 PM, said:

[...]
Don't know, try it out. I would assume an ME drive is going to have 63 slots regardless of it's capacity. It is really only useful if you have stacks of things, not unique items.

ME chests and interfaces don't work, because it just uses ids to request items. Its like you can tell the ME to give you a chest (146) but for a drone(13340) you'd need to be more specific which you cant, and ME has no slots and sorts automatically.
It works with chests because there you can use the slot number regardles of its contents.

[apemanzilla]

MrEmielH, on 01 April 2014 - 07:56 PM, said:

McLeopold, on 01 April 2014 - 07:22 PM, said:

MrEmielH, on 01 April 2014 - 05:49 PM, said:

McLeopold, on 01 April 2014 - 04:59 PM, said:

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

thanks, thats an inprovement indeed /> , would an me drive work? sorry ask so much questions but i would like my bees to bee all in one space /> ?

Don't know, try it out. I would assume an ME drive is going to have 63 slots regardless of it's capacity. It is really only useful if you have stacks of things, not unique items.

i know but using a drive with 10 times a 1k storage cell woulb be usefull, anyway, do you you have any idea why my computer constantly combined valiant with meadows when i requested an imperial?

Why not use an ME interface connected to a network with a storage bus on an indexer? Set the priority very high on the storage bus and all bees will be sent into the indexer

[MrEmielH]

Apemanzilla, on 01 April 2014 - 08:17 PM, said:

MrEmielH, on 01 April 2014 - 07:56 PM, said:

McLeopold, on 01 April 2014 - 07:22 PM, said:

MrEmielH, on 01 April 2014 - 05:49 PM, said:

McLeopold, on 01 April 2014 - 04:59 PM, said:

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

thanks, thats an inprovement indeed /> , would an me drive work? sorry ask so much questions but i would like my bees to bee all in one space /> ?

Don't know, try it out. I would assume an ME drive is going to have 63 slots regardless of it's capacity. It is really only useful if you have stacks of things, not unique items.

i know but using a drive with 10 times a 1k storage cell woulb be usefull, anyway, do you you have any idea why my computer constantly combined valiant with meadows when i requested an imperial?

Why not use an ME interface connected to a network with a storage bus on an indexer? Set the priority very high on the storage bus and all bees will be sent into the indexer

can you use an interface with the openbee program? if that is possible, it would be awesome

[apemanzilla]

MrEmielH, on 01 April 2014 - 08:29 PM, said:

Apemanzilla, on 01 April 2014 - 08:17 PM, said:

MrEmielH, on 01 April 2014 - 07:56 PM, said:

McLeopold, on 01 April 2014 - 07:22 PM, said:

MrEmielH, on 01 April 2014 - 05:49 PM, said:

McLeopold, on 01 April 2014 - 04:59 PM, said:

McLeopold, on 31 March 2014 - 06:57 PM, said:

MrEmielH, on 31 March 2014 - 06:53 PM, said:

are there plans to be able to use the indexer instead of a chest?

Yes, after I get the product chest going. You can't push product to an apiary chest or indexer, so right now it's not going to work. Go ahead and put it on top to see what the behavior is. I'm think combs would just stay in the apiary and slow down the clearApiary function.

Pushed an update. You can now put a product chest underneath the apiary. I've tested the indexer and it does not work. I'm assuming the ability to sort bees also messes with the slot numbers. The apiarist chest does work and gives you 125 slots for fairly cheap.

thanks, thats an inprovement indeed />/> , would an me drive work? sorry ask so much questions but i would like my bees to bee all in one space />/> ?

Don't know, try it out. I would assume an ME drive is going to have 63 slots regardless of it's capacity. It is really only useful if you have stacks of things, not unique items.

i know but using a drive with 10 times a 1k storage cell woulb be usefull, anyway, do you you have any idea why my computer constantly combined valiant with meadows when i requested an imperial?

Why not use an ME interface connected to a network with a storage bus on an indexer? Set the priority very high on the storage bus and all bees will be sent into the indexer

can you use an interface with the openbee program? if that is possible, it would be awesome

Don't see why you couldn't

[MrEmielH]

yay
and why i am not sure,
i just dont know if the required peripherals are different or not

[apemanzilla]

MrEmielH, on 01 April 2014 - 08:48 PM, said:

yay />
and why i am not sure,
i just dont know if the required peripherals are different or not

With OpenP, they're different but should share the inventory functions.

[MrEmielH]

ok thanks, so in theory i could use any kind of storage?

[McLeopold]

MrEmielH, on 01 April 2014 - 08:58 PM, said:

ok thanks, so in theory i could use any kind of storage?

Yes, anything that open peripherals would consider storage where the slots are consistant. The indexer is out. An ME interface doesn't make any sense. It is used to push specific things to machines which means making decisions about what to push. That's the job of openbee.

Once I get multiple apiaries up and running, you will be able to put an apiarist chest above each apiary. 8 chests equal 1 indexer. (128 * 8 = 1000)

MrEmielH, on 01 April 2014 - 07:56 PM, said:

i know but using a drive with 10 times a 1k storage cell woulb be usefull, anyway, do you you have any idea why my computer constantly combined valiant with meadows when i requested an imperial?

Valiant bees are considered hive bees that can be bred into commons. They have a long lifespan. They might have another trait that made them score higher than the other hive bees. It's best to keep valuable and rare bees somewhere else besides the openbee chest.

[Pixelmnkey]

Hello there! I've used both your setups, the first one with the double chest I'm getting the error "openbee: 522: Not all lua values used, last index: 2", what does it mean? I used Openbee Noble just to try it out. Also with the other setup using the proxy my modem won't activate when rightclicking it on the proxy, anything I'm doing wrong? I'm using these versions:

OpenPeripheralCore-0.3.0-snapshot-39
OpenPeripheralAddons-0.1.0-snapshot-41

Thanks for the help

[MrEmielH]

Pixelmnkey, on 02 April 2014 - 10:55 AM, said:

Hello there! I've used both your setups, the first one with the double chest I'm getting the error "openbee: 522: Not all lua values used, last index: 2", what does it mean? I used Openbee Noble just to try it out. Also with the other setup using the proxy my modem won't activate when rightclicking it on the proxy, anything I'm doing wrong? I'm using these versions:

OpenPeripheralCore-0.3.0-snapshot-39
OpenPeripheralAddons-0.1.0-snapshot-41

Thanks for the help

you have to connect the proxy with a modem, so a modem on an proxy (proxy facing chest) and a modem on the computer and then you activate them, the modem of the proxy must be on the back

[Pixelmnkey]

MrEmielH, on 02 April 2014 - 12:18 PM, said:

Pixelmnkey, on 02 April 2014 - 10:55 AM, said:

Hello there! I've used both your setups, the first one with the double chest I'm getting the error "openbee: 522: Not all lua values used, last index: 2", what does it mean? I used Openbee Noble just to try it out. Also with the other setup using the proxy my modem won't activate when rightclicking it on the proxy, anything I'm doing wrong? I'm using these versions:

OpenPeripheralCore-0.3.0-snapshot-39
OpenPeripheralAddons-0.1.0-snapshot-41

Thanks for the help

you have to connect the proxy with a modem, so a modem on an proxy (proxy facing chest) and a modem on the computer and then you activate them, the modem of the proxy must be on the back

It is on the proxy but it won't activate.

[keramond]

Hello

its really a wonderful program, thanks for that, but there seems to be something wrong with breeding, it's breeding cultivated <-> unweary the whole time back and forth to get to noble. It looks like the program tries to breed a common princess, but there are pure hive princess' and drones(more than enough) in the bee chest.

[MrEmielH]

Pixelmnkey, on 02 April 2014 - 12:40 PM, said:

MrEmielH, on 02 April 2014 - 12:18 PM, said:

Pixelmnkey, on 02 April 2014 - 10:55 AM, said:

Hello there! I've used both your setups, the first one with the double chest I'm getting the error "openbee: 522: Not all lua values used, last index: 2", what does it mean? I used Openbee Noble just to try it out. Also with the other setup using the proxy my modem won't activate when rightclicking it on the proxy, anything I'm doing wrong? I'm using these versions:

OpenPeripheralCore-0.3.0-snapshot-39
OpenPeripheralAddons-0.1.0-snapshot-41

Thanks for the help

you have to connect the proxy with a modem, so a modem on an proxy (proxy facing chest) and a modem on the computer and then you activate them, the modem of the proxy must be on the back

It is on the proxy but it won't activate.

on the back?