Deadlock989's Content

#262778 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 16 December 2016 - 02:08 PM in Programs

Deadlock989, on 16 December 2016 - 01:25 PM, said:

What do you think of someone taking the torch for this project? I can't do it myself but someone else may.

They'd be welcome - I can't actually stop anyone from doing that anyway and wouldn't want to even if I could. I'm not big on copyright

They might find it easier to start from scratch, though - bear in mind that this was the project I used to teach myself Lua. The code is sometimes ... inelegant.

#262774 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 16 December 2016 - 01:25 PM in Programs

Sciguy249, on 26 November 2016 - 06:05 AM, said:

This is awesome I love it but I have a few peripheral suggestions

Blood magic alter (I think internally its just a tank, but I might be wrong)
Botania mana pool (No clue how this one would work)
Jabba Barrels
Ic2 reactor time remaining
Logistics Pipes? (Could there be ANY support here, Not sure if its possible at all, maybe showing current crafting recipes)

Hi there, thanks for kind comments

I'm allergic to magic mods, especially when mixed with tech, so no, will never support Blood Magic, Thaumcraft etc
Botania is on that borderline between tech and magic but ... c'mon ... it's flowers.
Jabba Barrels are already supported, or are supposed to be
IC2 support has been pushed to the limit, nothing else useful can be extracted, unless there's been updates to IC2 to OpenPeriph I don't know about
LP, not sure, don't recall seeing anything in OpenPeriph docs about it

IntelectualMind, on 26 November 2016 - 08:27 PM, said:

Can you add suporrt for Warpdrive, reactors, and Auric Energy Bank and anything that produces or stores energy or has storage, and can you also add compat with matter Overdrive if possible, and can you add a % of full for storage and a transfer rate for energy storage, great for monitoring flow between, buffers and generators and storage banks

also can you add a part that allows you to multiply the return value for production and energy storage/liquid storage, so u can make a tower that's for example 5 wide 10 high and 6 deep, u can use wired modems to cover either the 10x6 or 10x5 surface then multiply by 5 or 6 respectively, like for essentially big non-(multiblock) structures, bc they can be disigned to power up evenly
i take MFSU's and build Fibre cable layer then MFSU's to whatever y hieght i want with outputs ontop then a layer of MFSU's on the top then i go 2 out on one side of the pack for the fiber cables in the center edge on same side then go straight down like in my screenshots
i have 6x5x10 MFSU pack so that's 300 MFSU's each able to hold 40 mil EU
so 300x40,000,000 = 12,000,000,000 EU total
i have one face and it's the 6x10 side so that face is 1 fifth of the whole pack so 12 bil *5 =2,400,000,000 so 2.4 billion a face, so my equalizer would have a random number and the top layer charges first and the bottom last so lets say it had a read of 1 mil for the entire top layer it would only say 6 mil on that face but since its the same accross, it's actually x5 that and is 30 mil, but the display would say 6 mil,i would like to have a section that allows us the people to set the return values by a muliple like a function where when we start up a section it says something like "would you like to modify the readout for 3-d consistant measures?" then we can do +,-,*,/, ^ of a number decimal or whole numbers
like for this i woud put *5 and it would muliple the reads to x5 of that block for the enire row line in line with the ports.

http://prntscr.com/dc64x3
http://prntscr.com/dc64xc
http://prntscr.com/dc64xi
http://prntscr.com/dc64xr
http://prntscr.com/dc64xs

Really ... "can you add support for anything that has storage" ... the answer to that would be "no"

I'm not sure what that big block of text actually means. For energy storage and tanks that support it properly, the gauges (bars) are already combined if they're of the same type and connected to the same client

Essentially I've reached the limit of what I can do for now - I'm also not playing much Minecraft these days and when I do it's with packs that don't include CC, so if there's ever a major new version, it'll be a total rewrite for OpenComputers. Sorry folks but it was fun while it lasted, thanks to all for the help and nice feedback.

#261137 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 28 October 2016 - 12:52 AM in Programs

jonny190, on 27 October 2016 - 07:19 PM, said:

Not sure if i'm just being daft but i cant get a MFSU monitor working, i've attached some screenshots below if its any help:
https://photos.googl...WxIREliQ08tTkpR
https://photos.googl...FNjek1tVXNKVnRn
https://photos.googl...0VKc003NFUxbVNR
Thanks in advance

That looks like the right set-up. Check that all the wired modems are turned on

foolish_tobs101, on 07 August 2016 - 06:14 PM, said:

Would it be possible to be able to have a setting to change the side that the ui change side cos it doesn't play well with jetpacks and anything that displays on that side

Most mods have a config that lets you move their display. "Simply Jetpacks" definitely does.

#253544 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 11 June 2016 - 03:25 PM in Programs

instinx, on 11 June 2016 - 01:02 AM, said:

Suggestion - In game method to change the hostname from DGServer

This is something I hadn't thought of since I usually play alone or in close co-op with another player. Good idea, I will investigate it.

RFTools - possibly but not a high priority

#253486 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 10 June 2016 - 08:55 PM in Programs

endriklos977, on 10 June 2016 - 01:25 PM, said:

Can't use it? Client says cannot find dgserver?
Any help would be appreciated.

If you're using wireless, your client computer is out of range of the server computer. Or you don't have a server computer at all.

Remember that y height of the modem and the weather both affect wireless modem range.

#252894 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 03 June 2016 - 07:47 PM in Programs

Version 1.03

- Added support for "barrel" types of storage: Thermal Expansion caches, JABBA Barrels, MFR DSUs.

The icon for these gauges changes to show what the cache/barrel is storing. Separate barrels/caches are not combined into one bar.

Storage Drawers was also explored but it does not expose the same functions as these mods, nor does it provide an accurate inventory interface, so it couldn't be made to show anything useful.

Good luck filling the bar on a DSU.

#252828 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 02 June 2016 - 09:30 PM in Programs

Version 1.02

- Added support for Immersive Engineering capacitors
- Added Thermal Expansion portable tanks

Also attempted to add EnderIO capacitor banks but they do not expose their full functionality to OpenPeripherals. Multiple cap blocks on the same modem network don't get registered even if they are separated by space. Multiblock cap banks don't work properly either, only exposing the attached block.

Also attempted to add some of the Imm Eng machines but had difficulties with tanks returning empty fields etc. Again, IE is not explicitly supported by OP at this time.

#252825 DeadGlass - CC & OpenPeripheral terminal glasses base monitoring

Posted by Deadlock989 on 02 June 2016 - 08:59 PM in Programs

aleben, on 21 February 2016 - 01:47 PM, said:

It's a very nice project!
Can you make it work with IC2 Nuclear Vessel Reactor?

Unfortunately not, due to the way IC2 works. DeadGlass does attach to the pressure vessel (if you use a coolant port) so it is already compatible. But the pressure vessel blocks only expose the tanks (hot and cold coolant). To get the EU readings you would need to attach a modem/computer to the inner reactor and that breaks the reactor design. They are not a proper multiblock.

giantawesomemeep, on 25 November 2015 - 03:03 PM, said:

Can you add ender IO support and also can it be set up so computers will save their revenant programs and run them when they can't connect to pastern because I generally play minecraft when I don't have internet connection

See the next post below for EIO issues.

If you don't want the programs to auto-update, then download 9zHBxCSz for the clients and bDj52xHR for the server.

funniray10, on 24 February 2016 - 10:29 PM, said:

can you add the JABBA barrel, i modded this program to allow it to make it work, but it was very hacky (i like to know how much steak i have)

I will definitely look at barrels, caches and drawers soon.

Zuler0, on 28 February 2016 - 11:42 PM, said:

Could you add the reactor from Draconic Evolution at some point?

No. I loathe that mod with a passion

Yanniclord, on 09 March 2016 - 03:30 PM, said:

@Everyone : This program is dead and will not update anymore. If you check Deadlock989's last seen online time stamp, you will know why (Last Active Oct 04 2015 11:47 PM).

Steady on now.

Yanniclord, on 09 March 2016 - 02:12 PM, said:

Also, the TE Energy Cells do not work anymore, their name now just is "powered_tile"

I can't duplicate this. They work fine for me with the TE versions in recent modpacks.

Yanniclord, on 09 March 2016 - 11:43 AM, said:

SGCraft RF and EU Power Units would be a nice support. I tried putton Peripheral Proxies onto them, but the PC says it does not recognize them.

Also the SGCraft Stargate itself would be a nice addition, to see how much power/energy it has stored.

I'm unaware of this mod but will put it at the bottom of my to-do list.